Description

PRODUCT DESCRIBTIONS :

Geomangan is formulated from a glauconite greensand and is capable of reducing iron,
manganese and hydrogen sulfide from water through oxidation and filtration. Soluble iron and
manganese are oxidized and precipitated by contact with higher oxides of manganese on the
greensand granules. The hydrogen sulfide is reduced by oxidation to an insoluble sulfur
precipitate. Precipitates are then filtered and removed by backwashing. When the oxidizing
capacity power of the Manganese Greensand bed is exhausted, the bed has to be regenerated
with a weak potassium permanganate (KMnO4) solution thus restoring the oxidizing capacity of
the bed. 1½ to 2 ounces of potassium permanganate, in solution, per cubic foot of Manganese
Greensand is considered sufficient for normal regeneration. It is required to vigorously
backwash and regenerate the bed when it is placed in service and before its oxidation capacity
is totally exhausted. Operating the bed after oxidation capacity is exhausted will reduce its
service life and may cause staining.
Origin: Taiwan
Packing: 30 Kgs Bag

ADVANTAGES :
• Iron reduction over wide pH range
• Effective reduction of hydrogen sulfide in addition to iron and/or manganese
• No harmful effects from a chlorine feed
• Low attrition for long bed life.

PHYSICAL PROPERTIES :
• Color: Broun
• Bulk Density: 80 lbs./cu. ft.
• Specific Gravity: 2.4-2.9
• Effective Size: 0.30-0.35 mm
• Uniformity Coefficient: 1.6
• Mesh Size: 18-60
• Attrition Loss Per Year: 2%

CONDITIONS FOR OPERATION :
• Water pH range: 6.2-8.5
• Maximum water temperature: 80°F/26.7°C
• Bed depth: 30 in.
• Freeboard: 50% of bed depth (min.)
• Regeneration: 1.5-2 oz of KMnO4 by weight per cu. ft.
• Service flow rate: 3-5 gpm/sq. ft., 8-10 gpm/sq. ft. intermittent flow possible
• Backwash flow rate: 10-12 gpm/sq. ft.
• Backwash bed expansion: 40% of bed depth (min.)
• Maximum practical limit of iron (Fe++) or manganese (Mn++) in raw water: 15 ppm
• Maximum practical limit of hydrogen sulfide (H2S): 5 ppm

INTERMITTENT REGENERATIONS :
• 10,000 gallons of water containing 1 mg/L Iron per cu.ft. regeneration
• 5,000 gallons of water containing 1 mg/L Manganese per cu.ft. regeneration
• 2,000 gallons of water containing 1 mg/L Hydrogen Sulfide per cu.ft. regeneration
• For dilute solutions mg/L = ppm
• 37,850 mg KMnO4 demand
• KMnO4 demand = [1 x mg/L Fe] + [2 x mg/L Mn] + [5 x mg/L H2S]

Brand Distribution PartnerShip